FREE DELIVERY!

3,000 BONUS * Free Shipping KERRY

Technical Support

Test Shop After-sales service

OPEN (MON-SAT)

8.00-17.30 (Mon-Fri) 9.00-15.30 (Sat)

CMT-DP01 Clock and Temperature Display

16,650.00 ฿

Availability: Please ask.

Thermometer Timer and Temperature Timer and Temperature Display Timer and Temperature Timer CMT-DP01 71 x 21 cm with temperature display
Ask a question about this product
Product Tags

Timer and Temperature Timer CMT-DP01

Thermometer Timer and Temperature Timer and Temperature Timer and Temperature Timer CMT-DP01

Temperature Clock Display Temperature Signs

Time sign with large temperature 8 digit number, 4 number, remote sighting, active mode.

CMT-DP01 is a clock and ThermometerLarge display with high red LED number 8 Inch 4 number visible digitally remote 2 active mode is Clock Mode and Display mode.

Clock Mode 4 Functions are as follows.

  1. Clock and Temperature (Clock Mode - Clock, Thermometer Function)
    • Can display time in hours, minutes, switch to the temperature display by the display can be set freely, can show the time and temperature alternating between 0-9 seconds or only one display.
    • Temperature can be measured in degrees Celsius -9.5 to 99.5 by resolution at 0.5C.
    • Special cable lengths up to 100 meters
    • Error time not exceed +/- 2 minutes per month
    • Battery backup system to keep time even with power outages.
    • Can be set via RS-232 Port.
    • Can be combined into Master and Slave.
  2. Stopwatch (Clock Mode - Timer / Stop-Watch Function)
    • Counted as MM: SS (minutes, seconds) and HH: MM (hours, minutes)
    • Count up and count down.
    • Set the Relay and External Device.
    • Press Start, Stop from the remote control or through the computer.
  3. Clock Mode (Score 1 Function)
    • Count the numbers as 4 digits. Press + or - and press Reset to make zero.
    • Can enter numbers directly Including the value shown.
    • There is a system to remember even if the power goes out.
  4. Clock Mode (Score 2 Function)
    • Count the score as the main 2 number. Press 2 + or - and press Reset to make zero.
    • Can enter numbers directly Including the value shown.
    • There is a system to remember even if the power goes out.

Display Mode Display

  • Displayed with the main 4 number by receiving data from a computer.
  • Connected directly to the computer.

{tortags, 187,3}

Contact Us